Link Your School ID Badge with the Konica Minolta Printers - HT602835

Use this documentation to pair or associate your school ID badge to the Konica Minolta Printers. In order for the printer to know what you’ve printed, you need to associate your school ID badge with the printers. If you do not have a school ID badge, please visit campus security to obtain one. These school ID badges serve a dual purpose. To allow access to the building and to print. 

You can find these printers at various locations throughout your campus. For example, in each campus's Library you will find these printers.

 

Linking your School ID Badge

If this is the first time you have received a school ID badge, or you’ve recently obtained a replacement, please visit your nearest Konica Minolta Printer to link your school ID badge.

The printers are large and look like the image below.

1. Konica Minolta.png
  1. Locate the badge scanner. Immediately to the right of the touch screen mounted to the printer. Lay your school ID badge on the badge scanner. After one second or two you’ll hear a beep.

    2.Badge Scanner.png
  2. Once you hear the beep a message will appear asking you if you’d like to associate your badge with your account? Choose ‘Yes’.

    3.Link Badge.png
  3. You’ll be prompted to enter in your @blakeschool.org email address and Blake Google Password. (Same password you use to login into your @blakeschool.org email account)

    4. Keyboard.png

    Make sure you enter your @blakeschool.org email address and password carefully. If entered incorrectly you will have to start over.

    5.User&Pass.png
  4. Once your username and password are entered, select ‘Set’.

    6. Set.png
  5. If done correctly, a message will appear saying that you’ve successfully associated your school ID badge. Click ‘OK’ to go back to the main login screen.

    7.Done.png


     

Support

  • Submit a Blake ISS Support ticket 
  • Email - support@blakeschool.org
  • Faculty and Staff Support Line  (952) 988-3416

 

 

 

Update 11/16/2026

Have more questions? Submit a request

0 Comments

Article is closed for comments.