Connecting to the Revolabs Wireless Microphone System

1. Connect the MacBook Air to the classroom A/V system via the Thunderbolt cable
   • The Revolabs microphone system will connect to the MacBook Air via the same Thunderbolt cable used to connect to the ClearOne (Unite 200) camera and the projector.
     
     
2. Once connected, open Zoom's Audio menu. Select the USB PnP Sound Device as the microphone
   • Note: Do not select USB PnP Sound Device under Select a Speaker.
   • 
     
     
3. Remove the Revolabs Microphone from the charging station.
   • The microphone will blink red and orange lights when connecting to the receiver. This should last around 10 seconds
   • Once connected, the microphone will blink green.
   • 
     
     
4. Press the button on the microphone to mute/unmute the microphone.

Revolabs HD™ Single/Dual Wireless Microphone System User Guide